ION iPK5B Guia De Inicio Rapido página 6

5
2
9
Rear Panel
1. Power Cable Input: Connect the included
IEC power cable from here to a power outlet.
2. Fuse Cover: If the unit's fuse is broken, use a
screwdriver or other tool to lift this tab to
replace the fuse. Replace it with a fuse of the
same rating. Using a fuse with an incorrect
rating can damage the unit and/or fuse.
3. Power Switch: Use this switch to turn the
unit on/off.
4. Bass Port: This port enhances the bass
generated by the woofer to increase the low-
frequencies. Make sure this hole is not
obstructed since this will adversely affect
bass response.
Operation
Pairing to a Bluetooth Device
1. Turn on your Bluetooth device.
2. Power on Karaoke Master. If you have previously connected to a Bluetooth device,
Karaoke Master will reconnect to it. If this is the first time connecting to the device, press
the Bluetooth button on Karaoke Master to enter pairing mode.
3. Navigate to your Bluetooth device's setup screen, find "Karaoke Master" and
connect. When the device is "paired" to Karaoke Master, the Bluetooth icon will be lit
solid and a confirmation tone will be heard.
Note: If your Bluetooth device prompts for a pairing code, enter "0000".
To disconnect pairing while the Bluetooth icon is lit solid, press and release the Bluetooth
button.
To connect to another Bluetooth device, repeat step 3.
Performing with Karaoke Master
1. Power on Karaoke Master.
2. Connect a microphone to one of the microphone inputs.
3. To use the built-in effects, select a category by pressing one of the FX Group buttons.
4. Use the -/+ buttons to select an effect preset; then press the Voice Effect button to turn
on the effects.
5. Sing into the microphone while adjusting the Microphone Volume dial and the Master
Volume dial.
Note: To avoid feedback, move the microphone away from the front of Karaoke Master's
speaker, as this will cause high pitched and damaging sound waves. If feedback starts, move
away from the speaker and lower the Microphone Volume dial.
6
11
13
1
3
2
4