Select Water Level; Select Wash/Rinse Temperature - Maytag HAVS-1 Manual De Uso

Using the Controls – Three-Speed Models
STEP 1

Select Water Level

Determine the selected setting based on clothes load
size. Selection should provide sufficient water to permit
clothes to circulate freely during agitation.
It may become necessary, due to bulky fabrics, to
adjust the water level after agitation begins. To adjust
the water level, turn the control to reset and then back
to the desired setting.
WATER LEVEL SETTING
Mini
Medium
Large
Oversize
Note
• Items must circulate freely for best results.
STEP 2

Select Wash/Rinse Temperature

Your washer gives you a choice of hot, warm or cold
water for washing and cold or warm water for rinsing.
When the Automatic Temperature Control knob is
set to "On," the washer provides the optimal wash
water temperature for cleaning. To save energy, this
washer will regulate wash water temperatures by
mixing hot and cold water to reach the proper water
temperature.
Note
• In wash water temperatures below 65
detergents do not dissolve well or clean well.
5
LOAD SIZE
1/4 Full
1/4 – 1/2 Full
1/2 – 3/4 Full
3/4 – Full
°
F,
WASH/RINSE
TEMPS
White and heavily soiled, color-fast
Hot/Cold
items
Warm/Warm Moderately soiled, colored items
Moderately soiled, colored items;
Warm/Cold
most wrinkle-free items
Brightly colored, lightly soiled
Cold/Cold
items; washable woolens
These settings feature Automatic
Temperature Control (A.T.C.):
A.T.C. A.T.C. Assures warm water wash
Warm Warm temperature of approximately 95
Warm Cold provides optimum cleaning results
Assures cold water wash
A.T.C.
temperature of approximately 75
Cold
to properly activate detergent
Cold
LOAD TYPE
F;
°
°
F