Patient Positioning; Instructions For Use - Chattanooga REVOLUTION WIRELESS Guia De Inicio Rapido

Do not let the modules come in contact with massage oils or similar products that could
damage the device or its accessories.
Placement of electrodes
The placement of the electrodes depends on the body area to be treated. Please find detailed
recommendations regarding the electrode placement within your Revolution Wireless remote control.
Depending on the electrode placement chosen for a desired program, different types and sizes of
electrodes may be used. When using two modules, the 2 snap electrode can be utilized in place of two
1 snap electrodes, such that each module is connected to the 2 snap electrode. Refer to the image below
illustrating a large electrode with 2 snap connectors used to connect 2 modules.

Patient positioning

To determine the best electrode placement and patient positioning, please refer to the electrode
placement guide on the device remote control (see illustration below for example).
A
Adjusting stimulation intensity
stimulation intensity settings
Stimulation intensity depends on the treatment objective and patient tolerance. A habituation period
may be required to increase patient tolerance and permit the increase of the intensity to the desired level.
For Pain Management treatments, intensity will usually be sensory. Depending on the chosen protocol,
the elicited sensation will either be mild-moderate sensory ("tingling") or strong-noxious ("almost
painful").
For neuromuscular electrostimulation programs intensity will usually be motor. Depending on the
chosen protocol, the elicited response will either be mild-moderate motor (mild contraction, smooth or
twitch) or strong motor.
i n s t r u C t i o n s F o r u s e
Large electrode with 1
snap connector
Small electrode with 1
snap connector
B
A Patient position
B Electrode placement
Large electrode with
2 snap connectors
are used to connect 2
modules
9