Chattanooga REVOLUTION WIRELESS Guia De Inicio Rapido página 17

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

- Electricity supply. Never connect the stimulation cables to an external power supply, as there is a
risk of electrocution.
- Do not apply stimulation near the area of an implant, such as cochlear implants, pacemakers,
skeletal anchorage or electric implants. This could cause an electrical shock, burns, electrical
interference or death.
- Never use the Revolution Wireless or the AC adaptor if it is damaged or open. There is a risk of
electric shock.
- Disconnect the AC adaptor immediately if there is abnormal heating or smell, or if smoke comes
from the AC adaptor or the device.
- Do not place the docking station in a confined space (carrying case, drawer etc.) when charging
the device. There is a risk of electrocution.
Equipment malfunction — these warnings refer to potential equipment mailfunctions that could result
in patient hazards.
- magnetic and electrical fields are capable of interfering with the proper performance of the unit.
for this reason make sure that all external devices operated in the vicinity of the unit comply
with the relevant EmC requirements. ¬ Devices that intentionally radiate electromagnetic energy,
such as X-ray equipment, mRI devices, ¬radio systems and cell phones are possible sources of
interference, as well as RfID equipment (e.g. electromagnetic security systems).
- Keep the unit away from such equipment and verify its performance before use. for additional
information, refer to the EmC section of this manual.
- Do not use the Revolution Wireless within 3 feet of short wave or microwave devices as this
could alter the currents generated by the stimulator. If you are in any doubt as to the use of the
stimulator in close proximity to another medical device, seek advice from the manufacturer of the
latter or from your doctor.
- Exercise caution when using electrotherapy while the patient is connected to monitoring
equipment with electrodes attached to the body. Stimulation could disrupt the signals sent to the
monitoring equipment.
- Refer repair and maintenance to authorized persons. Persons are authorized after training by a
specialist trained and commissioned by the manufacturer.
- Do not disassemble or modify the Revolution Wireless or its accessories. This may cause damage,
malfunction, electrical shock, fire, or personal injury.
- Inspect the Revolution Wireless and it's accessories for damage and loose connections at least
once a year. Damaged and worn parts must be immediately replaced with original spare parts by
authorized staff.
- Do not use the device if you are connected to a high-frequency surgical instrument as this could
cause skin irritation or burns under the electrodes.
i M P o rtA n t i n F o r M At i o n
Warning!
17
Tabla de contenido
loading

Tabla de contenido