Operation Instructions - Smartpond 70781 Manual Del Usuario

OPERATION INSTRUCTIONS

The filter kit can be used with
tubing to power a small water
feature, with the nozzle kit,
or with the diverter value to
ustilize the nozzle kit and add
a water feature.
To use the nozzle kit or
diverter valve with nozzle kit,
skip to step 3.
Step 1. For maximum water
flow, it is recommended
that the largest tubing size
recommended for your pump
is used. If using the largest
tubing size recommended
for your pump, trim the
tubing adapter using a
hacksaw at the location
indicated.
Attach the stepped hose
adapter with O-ring to the
filter kit. Then connect
tubing to the adapter.
NOTE: Tubing not included.
Step 2. Place the filter in
the pond as horizontal as
possible making sure it is
completely covered in water
and no deeper than 6.6-ft
below the water's surface.
Step 3. To install using the
nozzle set, attach the nozzle
tube with the diverter valve to
the filter kit.
Step 4. Choose a fountain
head for the desired water
effect, and assemble to the
top of the extension tube as
shown.
4 VISIT WWW.SMART-POND.COM FOR PRODUCT INFORMATION AND TIPS.
6.6-ft
maximum
Diverter valve
Fountain nozzle
1
Tubing
Adapter
Filter Kit
2
3
Nozzle tube
Flow control
Filter Kit
4