Adjusting Interface Parameters - Julabo SW22 Manual De Operación

Menu functions

8.6. Adjusting interface parameters

74
Correct data transmission takes place only when the interface
parameters of PC and water bath are identical.
1.
Press and
2.
Use the cursor keys
option
(BAUDRATE, PARITY, HANDSHAKE).
3.
Select the alternative state with the edit keys
confirm the selection with the ENTER key
4.
Press and
Adjustable interface parameters
BAUDRATE 48 = 4800 bauds *
PARITY
HANDSHAKE
0 = Protocol Xon/Xoff
1 = without handshake *
Data bits = 7; Stop bit = 1 *
(*Factory setting)
Like all parameters which can be entered through the keypad,
interface parameters are stored in memory even after the circulator
is turned off.
at the same time.
to select the desired menu
at the same time.
96 = 9600 bauds
0 = no parity
1 = odd parity
2 = even parity *
(software handshake)
and
.