Throttle Range Explanation; Protection Function - Carson Brushless Speed Controller Dragster 6S Manual De Instrucciones

e. Throttle Range Explanation
GB
Forward
zone
Top point/
maximal
throttle
Alert tones
• Alert tone input voltage abnormal:
The ESC begins to check the input voltage when
power on. If it is out of the normal range, such an
alert tone will be emitted:
"beep-beep-, beep-beep-, beep-beep-"
(There is 1 second time interval between every
"beep-beep-" tones).
• Alert tone throttle signal abnormal:
When the ESC can't detect the normal throttle
signal, such an alert tone will be emitted:
"beep-, beep-, beep-" (There is 2 seconds time
interval between every "beep-" tones).
24 CARSON Brushless Speed Controller Dragster 6S
Top point/
maximum
brake
Brake and
backward zone
Neutral point
LED status of normal running
• In normal use, if the throttle stick is in the neutral
range, neither the red LED nor the green LED
lights.
• The red LED lights when the car is running
forward or backward and it will flash quickly
when the car is braking.
• The green LED lights when the throttle stick
is moved to the top point (end point) of the
forward zone or backward zone.

Protection function

1. Low voltage cut-off protection: If the voltage of a
lithium battery pack is lower than the threshold
for 2 seconds, the ESC will cut of the output
power. Please note, that the ESC cannot be
restarted if the voltage of one lithium cell is lower
than 3.5 V.
2. Over-heat protection: When the temperature
of the ESC is over a factory preset threshold for
5 seconds, the ESC will cut off the output power.
When the over-heat protection happens, the
green LED will flash in such a style: "✼, ✼, ✼"
(single flash).
3. Signal loss protection: The ESC will cut off the
output power if the throttle signal is lost for
0.2 second.