Waring Commercial WFP16S Manual De Instrucciones página 9

• If processing food with the S-blade or whipping disc, now is the
time to add the food or liquid to the work bowl.
• Do not fill liquid over MAX LIQUID FILL LINE. If too much
liquid is used, it will overflow. In that case, stop operation,
remove liquid to below MAX LIQUID FILL LINE and continue
processing.
Read this if assembling batch bowl parts to use accessory
discs in batch bowl.
To assemble the adjustable slicing disc (WFP16S10), you must
remove bowl cover. Position the disc stem over the drive shaft
securely. Next, select the desired thickness setting on your
adjustable slicing disc. There are 16 different positions ranging
from 1–6mm in thickness. Once you've set the thickness, position
the plastic receptacle over the disc stem securely. Do not turn on
the unit until the batch bowl is properly assembled with the cover.
To assemble the reversible shredding disc (WFP16S12), you must
remove bowl cover. Position the disc stem over the drive shaft
securely. Next, select the desired shredding blade size. Your
reversible shredding disc has fine shredding blades on one side
and medium shredding blades on the other. Be sure the desired
blade size is facing up, and position the disc on the disc stem
securely. Do not turn on the unit until the batch bowl is properly
assembled with the cover.
NEVER ATTEMPT TO START THE FOOD PROCESSOR
WITHOUT THE COVER LOCKED INTO POSITION.
Two pushers for feed tube
There is a large food pusher and a small food pusher. The large
pusher is for processing larger vegetables. The small pusher
nests in the large pusher and can be used for smaller vegetables,
guiding long, thin vegetables for more precise cuts, or for jobs like
slicing pepperoni. Insert the small food pusher into the large food
pusher opening. Now you are ready to insert the large pusher into
the feed tube opening.
9