Stihl FS 300 Manual De Instrucciones página 65

Removing mounting hardware
1
2
3
4
Block the shaft
N
Using the combination wrench (1)
N
undo the nut (2) clockwise and
remove
According to version, remove rider
N
plate (3) and thrust washer (4)
Checking the thrust plate
The thrust plate is needed to mount all
cutting attachments on the gearbox.
FS 300, FS 350, FS 380
2
1
The thrust plate consists of the hub (1)
with a captive guard washer (2)
mounted on it.
WARNING
Never use the thrust plate without the
guard washer. Thrust plates without a
guard washer must be replaced
immediately.
Fitting the guard ring
The appropriate guard ring must be
used according to the cutting
attachment used.
The following guard rings are mounted
on the gearbox or available as special
accessories:
Guard ring for mowing applications
2
3
2
1
1
For optimum shield when using brush
knives and shredder blades
Attach guard ring (1) for mowing
N
applications
Fit thrust plate (2) and guard
N
washer (3)
English
63