Mounting The Deflector - Stihl FS 300 Manual De Instrucciones

Mounting the Deflector

Using the proper deflector
1
WARNING
Deflector (1) is approved only for
mowing heads, thus deflector (1) must
be attached before attaching a mowing
head.
2
WARNING
Deflector (2) is approved only for brush
knives, thus deflector (2) must be
attached before attaching a brush knife.
FS 300, FS 350, FS 380
2
WARNING
Deflector (2) is also approved for
mowing heads if a skirt and blade are
attached – see "Mounting the skirt and
blade".
3
WARNING
Deflector (3) is approved only for
shredder blades, thus deflector (3) must
be attached before attaching a shredder
blade.
4
5
WARNING
Limit stop (4), which acts as a deflector,
is approved only for circular saw blades,
thus limit stop (4) must be attached and
guard ring (5) replaced before attaching
a circular saw blade, see "Mounting the
cutting attachment" / "Circular saw
blades".
Installing the deflector
The deflectors (1 to 4) are attached to
the gearbox in the same manner.
7
6
Remove dirt from the joints on the
N
gearbox and deflector – do not allow
any dirt to enter the threaded holes
of the gearbox
Set the deflector on the gearbox (6),
N
Screw in and tighten the screws (7)
N
English
61