Connecting The By- Pass Motor; Start Up; Inspection, Maintenance And Cleaning; Filters - S&P CADB-D Serie Manual De Instalación, Uso Y Mantenimiento

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

MODELS CADB/CADT-DC 05 / 08 / 18 / 30 / 45 / 56 AV DP BP
CADB/CADT-DC 05 / 08 / 18 / 30 / 45 / 56 EV DP BP MODELS
8. CONNECTING THE BY– PASS MOTOR
For installation, see the description above, depending on the type of instal-
lation (Horizontal or vertical configuration) and connect the servomotor of
the by-pass (factory-fitted) as indicated in the following illustration:

9. START UP

Before starting, it is recommendable to carry out the following verifications:
- Make sure there are no foreign bodies inside the device and that all components are secured on their positions.
- Ensure manually that the fan does not touch the walls.
- Make sure that the inspection hatch is closed.
ATTENTION:
If the outlets of the fan are not ducted an adequate protection net must be fitted.
Check the earth connection.
The electrical connection should be made by qualified personnel.

10. INSPECTION, MAINTENANCE AND CLEANING

10.1. FILTERS

The state of the filters can be checked by means of special pressure take off points located on both sides of the filters, on the lower side of
the unit, in the case of horizontal configuration, and on one of the sides in the case of vertical configuration, connecting it to a differential
pressure switch.
The maximum recommended fall in pressure in the standard G4 filters is 130/150 Pa.
- Inspection through the side of the unit:
Using the cutting screwdriver, rotate the catch of the "Filter inspection panel" to the left and remove the panel.
Press the filter to the right in the securing clips and remove the filter.
- Inspection of the bottom:
Release the closing bolts of the "Filter inspection panel" and remove the panel, grasp the filter handle and unlock the clips that secure it
and then pull it downwards.
- Recommended regular maintenance:
Depending on the air pollution (Dust, smoke...), it is recommended to replace the filter every 15 to 30 days at the most.
CADB/CADT-DC 05 / 08 / 18 / 30 / 45 / 56 CV DP BP MODELS
RED
AC 230 V
25
BLUE (4)
BLACK (6)
WHITE (7)
Tabla de contenido
loading

Este manual también es adecuado para:

Cadb-di serieCadb-dc serieCadt-d serieCadt-di serieCadt-dc serieCadb-d 05 ah dp ... Mostrar todo

Tabla de contenido