Vertical Configurations; Cadb/Cadt-D 05 / 08 / 18 / 30 / 45 / 56 Av Dp Models; Cadb/Cadt-D 05 / 08 / 18 / 30 / 45 / 56 Av Dp Bp Models; Cadb/Cadt-Di 05 / 08 / 18 / 30 / 45 / 56 (A-C-E)V Dp Models - S&P CADB-D Serie Manual De Instalación, Uso Y Mantenimiento

7.5. VERTICAL CONFIGURATIONS
7.5.1. CADB/CADT-D 05 / 08 / 18 / 30 / 45 / 56 AV DP
MODELS
Models without an electric battery, but with the possibility of install-
ing a water coil, for post-heating in remote installation configuration,
with a double insulation wall and no by-pass.
The airflows indicted in these configurations can be changed, ac-
cording to the installation.
The installer must only take into account the correct connection of the evacu-
ation system for water produced by condensation (See section 7.3.3).
From the factory configuration, we can configure the appliance, tak-
ing into account that we can turn it , thus modifying the position of
the support feet, and at the same time, it will also be necessary to
modify the position of the "water collection" tray, according to the
chosen configuration.

7.5.3. CADB/CADT-DI 05 / 08 / 18 / 30 / 45 / 56 (A-C-E)V DP MODELS

(Single and three phase)
Models with double insulating wall, post heating water coil and no by-pass.
The airflows indicted in these configurations CANNOT be changed, according to the installation.
The installer must take into account the correct connection of the evacuation system for water produced by condensation (See section 7.3.3).
Do not position the post-heating resistances in a different manner to the factory-supplied layout.
CADB/CADT-DI 05 / 08 / 18 / 30 / 45 / 56 AV DP MODELS
CADB/CADT-DI 05 / 08 / 18 / 30 / 45 / 56 EV DP MODELS

7.5.4. CADB/CADT-DI 05 / 08 / 18 / 30 / 45 / 56 (A-C-E)V DP BP MODELS

(Single and three phase)
Models with double insulating wall, post heating electric battery and with a by-pass.
The airflows indicted in these configurations CANNOT be changed, according to the installation.
The installer must take into account the correct connection of the evacuation system for water produced by condensation (See section 7.3.3).
Do not position the post-heating resistances in a different manner to the factory-supplied layout.
7.5.2. CADB/CADT-D 05 / 08 / 18 / 30 / 45 / 56 AV DP BP
MODELS
Models without an electric battery, but with the possibility of install-
ing a water coil, for post-heating in remote installation configuration,
with a double insulation wall and with a by-pass.
The airflows indicted in these configurations CANNOT be changed,
according to the installation.
CADB/CADT-DI 05 / 08 / 18 / 30 / 45 / 56 CV DP MODELS
23