Klarstein 10029702 Manual Del Usaurio página 18

Press this button and the mode will circulate according to below sequence:
COOL > DRY > FAN
• COOL: Under this mode, cooling mode indicator is bright. Dual-8 nixie tube displays
Mode button
• DRY: Under this mode, drying mode indicator is bright. The display won't display.
• FAN: Under this mode, the air conditioner only blow fan. Fan indicator is bright. Dis-
Press this button and the fan speed will circulate as "low speed > medium speed >
Fan button
high speed > auto fan > low speed".
Press timer button to enter into timer setting mode. Under this mode, press + or - but-
ton to adjust the timer setting. Timer setting will increase or decrease 0.5 hour by pres-
sing + or - button within 10 hours, while timer setting will increase or decrease 1 hour
Timer by pressing + or - button beyond 10 hours. After timer setting is finished, the unit will
display temperature if there' s no operation for 5s. If timer function is started up, the
upper indicator will keep the display status. Others, it won't be displayed. Under timer
mode, press timer button again to cancel timer mode.
Press sleep button to enter into sleep mode. If the controller operates at cooling mode,
after sleep mode is started up, preset temperature will increase by 1°C within 1 hour
;preset temperature will increase by 2°C within 2 hours and then the unit will operate at
Sleep
this temperature all the time; Sleep function is not available for fan mode, drying mode
and auto mode. If sleep function is started up, the upper indicator will keep the display
status. Others, it won't be displayed.
Operation of Remote Control
After putting through the power, the air conditioner will give out a sound. Operation indictor is ON (red indica-
tor). After that, you can operate the air conditioner by using remote controller. Under on status, pressing the
button on the remote controller, the signal icon on the display of remote controller will blink once and the air
conditioner will give out a "de" sound, which means the signal has been sent to the air conditioner.
Under off status, set temperature and clock icon will be displayed on the display of remote controller (If timer
on, timer off and light functions are set, the corre- sponding icons will be displayed on the display of remote
controller at the same time); Under on status, the display will show the corresponding set function icons.
ON/OFF button Press this button to turn unit on/off.
Pressing this button once can select your required mode circularly as below (the corres-
ponding icon will be lit up after the mode is selected): COOL > DRY > FAN.
• When selecting cool mode, air conditioner will operate under cool mode. Then press
Mode button
• When selecting dry mode, air conditioner will operate at low fan speed under dry
• When selecting fan mode, air conditioner will operate in fan mode only. Then press
set temperature. Temperature setting range is 16°C~30°C.
play won't display.
+ or - button to adjust set temperature. Press FAN button to adjust fan speed.
mode. In dry mode, fan speed can't be adjusted.
FAN button to adjust fan speed.
18