Tandem Syncing (Pairing Tablet To Primary Base) - Leggett & Platt Premier Serie Manual Del Usaurio

Table of Contents
TANDEM SYNCING
1. Pair one (1) tablet to base 1. Note: Leave base 2 (secondary base) unplugged
until tablet is paired to base 1.
a. Plug tablet into USB port on side of base or wall outlet using charger
provided with tablet.
b. Press and hold power button on tablet until display appears.
c. Lock icon
and swipe to right and swipe to right and swipe to right
d. Tap on Leggett & Platt App
e. f Bluetooth is connected, the BluetOoth icon at the top of the screen will
I
show fl ashing triangles
will appear over the Bluetooth icon will appear over the Bluetooth icon
f. Wait for the System Bluetooth icon to appear in the top right corner
of the screen, next to the battery icon.To pair your base, tap on App
Bluetooth icon at the top of the screen. The Select a Device to Connect
dialogue box will come up. Tap on Scan for Devices. Select your base by
tapping on it (MYBED-XXXX). The Bluetooth Pairing Request dialogue box
will come up in a few seconds. A brief message will appear telling you your
base is connected. If scan for devices does not display MYBED-XXXX, make
sure: a. the primary/secondary switch is in primary mode; b. base is plugged
into a working, grounded electrical outlet; c. Bluetooth is turned on in the
Android Settings page. If all of these are correct, close the app and open it again.
g. Plug base 2 (secondary base) into working, grounded electrical power outlet.
One tablet should now operate both bases as one unit. Note: Do not use the other
tablet to operate base.
will appear indicating screen is locked. Touch lock icon
Leggett & Platt App
IF TABLET LOSES CONNECTIVITY TO BASE, CLOSE
LEGGETT & PLATT APP. TAP ON THE ACTIVE APPS ICON
AT THE BOTTOM OF THE SCREEN. TAP AND SWIPE THE
LEGGETT & PLATT APP TO THE RIGHT, OFF THE SCREEN.
TAP THE HOME ICON ON THE BOTTOM OF THE SCREEN.
TAP THE ANDROID SETTINGS ICON TO OPEN. TURN
BLUETOOTH SETTING TO OFF. TAP HOME ICON, THEN
TAP LEGGETT & PLATT ICON TO RELAUNCH APP.
(pairing tablet to primary base)
to unlock tablet. to unlock tablet. to unlock tablet.
.
. If Bluetooth is not connected, a red circle
. .
NOTE
7