Accessories Screen - Leggett & Platt Premier Serie Manual Del Usaurio

Table of Contents
Operate select accessories with tablet by pairing the
Bedroom Accessory Control to the control box.
1. Plug Bedroom Accessory Control into wall
outlet. (Take note of the learning button.)
2. Plug accessory into Bedroom Accessory Control.
3. Tap Add icon
4. After a one-time disclaimer, a Pair Accessory
dialogue box will come up.
5. Hold tablet near Bedroom Accessory Control.
When ready to pair accessory, press OK.
6. Press and hold learning button on Bedroom
Accessory Control within 10 seconds until
device appears on screen, then release. A
message will appear saying "Device successfully
paired."
7. Tap On/Off button next to accessory name.
Accessory should operate on and off.
Note: Paired device can also be operated from
Bedroom Accessory Control.
Your base comes with one (1) Bedroom Accessory Control. App is capable of controlling up
to four (4) Bedroom Accessory Controls. Additional Bedroom Accessory Controls (Part No.
4B8056) may be purchased from Leggett & Platt by calling 800-888-3078.
ACCESSORIES SCREEN (SCREEN 3)
on Accessories screen.
USE OF AUTOMATED
FEATURES FOR ELECTRICAL
PRODUCTS COULD CAUSE
SERIOUS INJURY OR DEATH.
MAKE CERTAIN THAT ANY
ELECTRICAL PRODUCT THAT
IS BEING SET UP TO BE
ENERGIZED OR ADJUSTED
AUTOMATICALLY WITHOUT
SUPERVISION CANNOT
CAUSE A HAZARD BY
AUTOMATIC OPERATION.
LEARNING
BUTTON
BEDROOM ACCESSORY
CONTROL
(plugged into wall outlet)
11