Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Description
Infrared cell
Factory settings
When first powered up, pressing the
installation.
This option is provided so that the correct operation and connection of all the shutters can be checked.
Pressing Learn
(1)
twice cancels this general control function.
(1)
Programming or learning button.
Operation:
The central shutter switch is a :
• Transmitter that controls all the openings linked to the terminals of the receivers linked with it during the learning
(1)
procedure
.
One press on a button makes it blink for 10 secs.
It has two auxiliary inputs E1 and E2 that can be linked to a time switch, dusk switch, etc. :
- The appearance of phase on E1 starts the rise of the shutters connected to the receivers linked to the central switch.
- The appearance of phase on E2 starts the lowering of the shutters connected to the receivers linked to the central
switch.
Important :
The Stop control cannot be made from the auxiliary inputs E1 and E2.
Note :
It has an infrared interface for controlling products of the installation using an "In One by Legrand" infrared transmitter
(e.g. Cat. No. 882 00).
(1)
Learning : procedure that enables a scenario
(2)
Scenario : set of controls executed simultaneously on the various receivers (actors) that have been linked to the transmitter (leader) during
the learning procedure.
LEARN button
LEARN indicator
buttons controls all the opening points (roller shutters or blinds) of the
19
19
(2)
to be defined and saved.
20
20
Control
buttons
Tabla de contenido
