Install I/O Submenu - Bosch DinionXF LTC 0610 Serie Manual De Instalación

Dinion XF | Installation Manual
Adjustment procedure Manual-iris Lens:
1. Unlock the back focus locking button.
2. Adjust the lens to the maximum lens opening.
3. Turn the back focus adjustment as required.
4. Lock the back focus locking button.
Adjustment procedure Video-iris Lens:
1. Unlock the back focus locking button.
2. Access the Lens Wizard menu.
3. SET BACK FOCUS NOW is highlighted in the menu.
4. Turn the back focus adjustment as required.
5. Lock the back focus locking button.
6. Select SET LVL in the menu; the LEVEL bar appears.
7. Point the camera at the scene it will be mostly viewing.
8. Adjust the level potentiometer located on the lens until the
LEVEL bar is in the central position.
9. Exit the menu.
Note
The best performance with video iris lenses is obtained when the peak/
average potentiometer of the lens is set to either full average or full peak
matching the position of the peak/average balance in the MODE x ALC
menu.

Install I/O submenu

Function Selection
SYNC IN 75 Ohm, HIGH
COMM ON, OFF
CABLE OFF, DEFAULT,
COMP RG59, COAX12,
COAX6
COMP 0, 1, .. +15
LEVEL
ALARM Select submenu
EXIT
Bosch Security Systems | 2003-10 | V0.5
Description
Select 75 Ohm if the external sync input is not
terminated elsewhere.
If OFF, Bilinx communication is disabled.
Cable compensation is used to avoid the need for
amplifiers in long distance coax connections up to
1000m (3000ft). For optimum results select the
coaxial cable type used or if unknown, DEFAULT.
Sets the level of cable compensation.
Return to the INSTALL menu
EN | 24