Connection Of Accessories - Ingecon SUN 1Play TL GM Manual De Instalacion Y Uso

Ingeteam

7. Connection of accessories

Throughout this chapter, the process is explained for connecting the optional accessories in the unit, including the
communication accessories, along with the potential-free relay and the digital input.
Optionally, a communication system can be installed in order to establish a connection with the unit to monitor
and configure it, either locally or remotely, depending on the type of communication chosen and the needs of the
installation.
As standard these units have local communication via USB. In addition there is the option of establishing
connections using other technology types. Depending on the type of technology, the connections will be made in
the INGECON Comm or INGECON Connect connectors:
Ethernet TCP (including communication via RS-485, for optional use)
Communication for the direct self consumption kit
If using communication via the optional RS-485 in each communication accessory, do not use it
simultaneously with the standard USB communication.
See the corresponding communication accessories manual for further information.
The wiring must be routed inside the unit via a conduit, which is inserted through a coupling in order
to maintain the unit's protection class.
Read carefully before starting the connection process.
24
Connection of the communication accessories
Communication accessory
RS-485
Wi-Fi TCP
Connection of accessories
INGECON Comm
INGECON Connect
ABE2013IQM01_A - Installation and Operation Manual
Connector