Ingecon SUN 1Play TL GM Manual De Instalacion Y Uso página 22

Ingeteam
1. Mark the fixing points for the plates on the wall.
2. Drill holes in the wall with a suitable bit for the fastening elements to be used to secure the plate to the
wall later.
3. Fix the plate using fastening elements that are appropriate for the wall onto which it is to be installed.
The diameter of the holes of the plate are 0.30 in (7.5 mm).
4. Suspend the unit from the plate by fitting the slats in the openings on the back of the unit.
5. Mark the lower attachment point, remove the unit and drill the hole in the wall. Install the unit again
and fix the bottom attachment using a suitable fastening element. Said hole has a diameter of 0.30 in
(7.5 mm).
6. Check that the unit is properly secured.
Once the unit has been installed correctly, the combiner box is installed. Then the appropriate connections are
carried out.
22
200 mm (7.87 in)
ABE2013IQM01_A - Installation and Operation Manual
Installing the unit