Alcad 912-UC Serie Manual De Instalación Y Programación página 22

3- Overload indicator
4- Power / Control output connector
5- Ventilation grooves
6- Connection cable to the mains
7- Supply / Control cable
8- List of technical characteristics
2.2 Description of UC processors
9- Satellite signal input F connector from the previous processor or from the
external LNB unit
10- Satellite signal output F connector to the next processor
11- Output voltage switch for the external LNB unit
12- Indicator of the PLL connection of the input frequencies from the first
processor
13- Infrared receiver
14- Programming indicator
15- Program mode switch (IR)
16- Infrared emitter
17- Indicator of the PLL connection of the input frequencies from the second
processor
18- Indicator of the PLL connection of the output frequencies of the two
processors
19- Level regulator of the output signal of the first processor
20- Power / Control output connector
21- Level regulator of the output signal of the second processor
22- Satellite signal input F connector from the previous porcessor (to the left)
23- Satellite signal output F connector to the next processor or to the
amplifier (to the right)
24- Mass connection
25- Upper and lower bridges (41,5 mm)
26- List of technical characteristics
2.3 Description of the ZF amplifier
27- Satellite signal input F connector from the processors
28-Equalization
29- Level regulator of the output signal
30- Operating indicator
31- Supply connectors
32- Input F connector for units on the terrestrial TV band (-2 dB)
33- Signal output F connector
34- Mass connection
35- Supply cable
36- List of technical characteristics
Serie 912 - UC ENG - 21