S Preading Quantity Adjustment - Cosmo PDC 400 Manual De Uso

The spreading width will be of 9 – 12 meters, by turning the key till the arrow will be downwards (till
you hear the click).
After recording the spreading width remove the key.
In order to obtain lower or specific spreading widths, use the proper pendulum (when available) or
reduce the revolutions of the pto shaft.
5.1.2. s
preadiNg quaNtity adjustmeNt
The fertilizer spreading is regulated by a dosing rod that operates on the opening width of the exits on
the bottom of the hopper.
In order to regulate the fertlizer quantity you intend to spread, it is necessary to have the slide ruler
handly (attached to this manual) and the spreading chart (sticked on the hopper and located in the
manual itself, see on paragraph 5.1.3).
The recorded data will be kept only if:
1. a standard pendulum is used;
2. the distance between the ground and the pendulum end is about 75 cm ( working height);
3. the rotation speed of the power take-off is 540 r.p.m.
In order to achieve a right adjustment follow the instructions below:
1. Establish the
2. Establish the
by moving the inner part of the slide ruler;
Pendular Spreader PDV - PDHV models
spreading width you want to adopt (see on paragraph 5.1.1.);
EXAMPLE 1: Spreading width choosen = 12 meters
quantity of the product you want to spread for a surface unit (kg/ha or lbs/acre),
EXAMPLE 2: quantity spread for hectare 200 kg
19