Polesaw Safety Warnings - GreenWorks CS-80-XR-T Manual Del Propietário

IMPORTANT SAFETY INSTRUCTIONS
6. SERVICE
• Have your power tool serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained.
7. FOR ALL APPLIANCES
• Avoid Dangerous Environment – Don't use appliances in damp or wet locations.
• Don't Use In Rain.
• Keep Children Away – All visitors should be kept at a distance from work area.
• Dress Properly – Do not wear loose clothing or jewelry. They can be caught in moving parts.
Use of rubber gloves and substantial footwear is recommended when working outdoors. Wear
protective hair covering to contain long hair.
• Use Safety Glasses – Always use face or dust mask if operation is dusty.
• Use Right Appliance – Do not use appliance for any job except that for which it is intended.
• Don't grasp the exposed cutting blades or cutting edges when picking up or holding the
appliance. (For grass shears and similar appliances only.)
• Don't Force Appliance – It will do the job better and with less likelihood of a risk of injury at the
rate for which it was designed.
• Don't Overreach – Keep proper footing and balance at all times.
• Stay Alert – Watch what you are doing. Use common sense. Do not operate appliance when you
are tired.
• Disconnect Appliance – Disconnect the appliance from the power supply when not in use, before
servicing, when changing accessories such as blades, and the like.
• Store Idle Appliances Indoors – When not in use, appliances should be stored indoors in dry,
and high or locked-up place – out of reach of children.
• Maintain Appliance With Care – Keep cutting edge sharp and clean for best performance and
to reduce the risk of injury. Follow instructions for lubricating and changing accessories. Inspect
appliance cord periodically, and if damaged, have it repaired by an authorized service facility.
Inspect extension cords periodically and replace if damaged. Keep handles dry, clean, and free
from oil and grease.
• Check Damaged Parts – Before further use of the appliance, a guard or other part that is
damaged should be carefully checked to determine that it will operate properly and perform its
intended function. Check for alignment of moving parts, binding of moving parts, breakage of
parts, mounting, and any other condition that may affect its operation. A guard or other part that
is damaged should be properly repaired or replaced by an authorized service center unless
indicated elsewhere in this manual.

8. POLESAW SAFETY WARNINGS

• Keep all parts of the body away from the saw chain. Do not remove cut material or hold material
to be cut when blades are moving. Make sure the switch is off when clearing jammed material.
Saw chain continues to move after the switch is turned off. A moment of inattention while
operating the extended-reach pruner may result in serious personal injury.
• Carry the extended-reach pruner by the handle with the saw chain stopped. When transporting
or storing the extended-reach pruner, always fit the saw chain device cover. Proper handling of
the extended-reach pruner will reduce possible personal injury from the saw chain.
• Hold the extended-reach pruner by insulated gripping surfaces only, because the saw chain may
5