Taurus Cairo Slim 650 Manual Del Usario página 20

guarantee and the manufacturer's
liability null and void.
Installation
- Be sure to remove all packaging
material from inside the appliance.
- Respect the legal provisions con-
cerning safety distances from other
elements such as pipes, electrical
connections, etc.
- Ensure that the appliance is level
with respect to the floor.
- The appliance requires suitable
ventilation in order to work properly.
Leave a space of 15 cm between
walls or other obstacles and 20cm
from the floor. (Fig 2)
- Do not cover or obstruct any of the
openings of the appliance.
- Do not cover or obstruct the sides
of the appliance, leave a minimum
space of 2cm around the appliance.
- To achieve the highest efficiency
from the appliance and so as to be
able to install the appliance on a
cold wall (an exterior wall) and below
a window. But never obstructing or
covering a ventilation area.
- The appliance should work well with
its wall support attached or with its
base/feet attached.
Assembling the wall bracket:
- The appliance has a wall support (J)
to support the product.
- Fix the wall support as you think
appropriate, using plugs.
- Taking into account the separation
distances mentioned above, place the
wall support in the required position
and mark the drilling points on the
wall (fig 1).
Manual Cairo Slim.indb 20
- Drill on the marks and introduce the
plugs (fig 2).
- Fit the support, lining up its holes
with those of the plugs, and screw on
(Fig. 3).
- Make sure that the bracket is firmly
fixed; it should be able to support twi-
ce the weight of the appliance.
- Fit the appliance into the wall
support.
Fitting the base feet
- The appliance has some base feet
(I) on which the product can be
supported.
- To assemble the base feet, place the
appliance face down.
- Position the base feet on the body
of the appliance using the screws (K)
(provided with the appliance)
- Stand the appliance up again so
as to check that the base feet work
properly.
Instructions for use
Before use:
- Make sure that all the product's
packaging has been removed.
Use:
- Unroll the cable completely before
plugging it in.
- Connect the appliance to the mains.
- Turn the appliance on using the on/
off switch.
The transmitter comes on, going into
stand-by mode.
- The ambient temperature will
appear in the screen.
Press the operation/stand-by button
to turn the appliance on.
25/06/12 16:00