Viking Range 5 Serie Manual De Instalación, Operación Y Mantenimiento página 12

CAUTION
!
Never try to move a loaded shelf, remove everything from
the shelf before moving. Use both hands when moving the
shelf.
Installed shelf
tang
Rear tang
(hook) on
shelf
Figure 18a
Grasp the shelf by the front with
both hands and rotate the front
of the shelf up, then lift the shelf
up and remove the shelf from the
SHELVING CONFIGURATIONS
To Add or Remove a Shelf
Remove stored product from the shelf. Do not try to remove
a loaded shelf from the appliance. Grasp the shelf front with
both hands, rotate the front upward and lift out. (See Figure
18). To install a shelf insert the shelf in the appliance and
insert the top hooks into the shelf support slots and drop
the shelf down so the hooks drop over the bottom of the
slots.
Shelf support
slot
Make sure your cantilever shelf is secure on the shelf
supports by pressing down on the shelf before loading.
shelf ladders.
12
CAUTION
!
Figure 18