Tabla de contenido
Idiomas disponibles
Idiomas disponibles
2.2 Application Limits: Take action to avoid sharp edges, rough, abrasive or corroded surfaces and edges, and thermal, electrical and chemical
hazards. Ensure the tripod is on solid ground, the tripod head is level with the surface, the feet are in good contact with the surface, and the pins
and detents are properly employed.
When used with a FallTech device, the tripod is rated for one worker weighing a maximum of 310 lbs (140 kg) (including all clothing, tools, and equipment).
For emergency retrieval applications, more than one person may be attached to the tripod. For rescue purposes, devices may be mounted in any
manner and place that would facilitate the rescue.
NOTE: When used as a material lowering/hoisting device, the tripod is rated at 620 lbs.
3. SYSTEM REQUIREMENTS
3.1 Capacity: The capacity of the tripod in Specifications is listed as 310 lbs. (140 kg) including tools, clothing, etc. For material handling
applications with a designated material handling winch, the tripod capacity is 620 lbs. When at maximum extension, the FallTech tripod has a
maximum lift height of 80" above the working surface. Ensure personnel can be removed from the space in the event of a rescue.
3.2 Compatibility Of Connectors: Connectors are considered compatible with connecting elements when they have been designed to work
together in such a way that their sizes and shapes do not cause their gate mechanisms to open inadvertently, regardless of how they become
oriented. Contact FallTech if you have any questions about compatibility. Connectors must be compatible with the anchorage or other system
components. Do not use equipment that is not compatible. Non‐compatible connectors may unintentionally disengage. Connectors must be
compatible in size, shape, and strength. Self‐closing, self‐locking snap hooks and carabiners are required by OSHA.
3.3 Compatibility Of Components: Equipment is designed for use with approved components and subsystems only. Substitutions or replacements
made with non‐approved components or subsystems may jeopardize compatibility of equipment and may affect the safety and reliability of the
complete system.
3.4 Making Connections: Only use self‐locking snap hooks and carabiners with this equipment. Only use connectors that are suitable to each
application. Ensure all connections are compatible in size, shape and strength. Do not use equipment that is not compatible. Visually ensure all
connectors are fully closed and locked. Connectors (snap hooks and carabiners) are designed for use only as specified in the user instruction
manual provided with each product. See Figure 13 in Appendix B.
DO NOT use rebar hooks or any large‐throat opening hooks with this tripod.
3.5 Personal Fall Arrest System: The additional PFAS components used with this equipment must meet applicable OSHA requirements. A FBH
must be worn when this equipment is used as a component of a PFAS. As required by OSHA, the personal fall protection system must be able to
arrest the user's fall with a maximum arresting force of 1,800 lbs., and limit the free fall to 6 feet or less. If the maximum free fall distance must be
exceeded, the employer must document, based on test data, that the maximum arresting force will not be exceeded, and the personal fall
protection system will function properly.
3.5.1 PFAS Anchorage Strength: The tripod shown in Table 1 is listed as having a minimum tensile strength of 5,000 lbs. To maintain OSHA
compliance, the structure where the unit is installed must be capable of supporting at least 5,000 lbs, or be designed, installed and used as part of a
PFAS, which maintains a safety factor of at least 2:1, under the supervision of a qualified person.
3.5.2 Work Positioning: Work positioning requires an anchorage capable of supporting 5,000 lbs applied in the direction permitted by the system.
3.5.3 Personnel Riding: A structure used for personnel riding, lowering and hoisting, must be able to support a static load of 2,500 lbs applied in
the direction permitted by the system.
3.5.4 Material Handling: A structure used for material handling must be able to support a static load of 2,500 lbs applied in the direction permitted
by the system.
3.5.5 Rescue: A structure used for rescue must be able to support a static load of 2,500 lbs applied in the direction permitted by the system.
3.6 Definitions: The following are definitions of terms as defined in ANSI Z359.0‐2012.
Authorized Person: A person assigned by the employer to perform duties at a location where the person will be exposed to a fall hazard
(otherwise referred to as "user" for the purpose of these instructions).
Certified Anchorage: An anchorage for fall protection, positioning, restraint, or rescue systems that a qualified person certifies to be capable of
supporting the potential fall forces that could be encountered during a fall or that meet the criteria for a certified anchorage prescribed in the standard.
Competent Person: One who is capable of identifying existing and predictable hazards in the surroundings or working conditions which are
unsanitary, hazardous, or dangerous to employees, and who has authorization to take prompt corrective measures to eliminate them.
Qualified Person: A person with a recognized degree or professional certificate and with extensive knowledge, training, and experience in the fall
protection and rescue field who is capable of designing, analyzing, evaluating and specifying fall protection and rescue systems to the extent
required by the standard.
Rescuer: Person or persons other than the rescue subject acting to perform an assisted rescue by operation of a rescue system.
4. INSTALLATION AND OPERATION
WARNING
Do not alter or intentionally misuse this equipment. Consult FallTech when using this equipment in combination with components or
subsystems other than those described in this manual.
Do not connect rebar hooks, large carabiners, or large snap hooks to the FBH dorsal
D‐rings as this may cause a roll‐out condition and/or unintentional disengagement.
Examine the work area. Take action to avoid sharp and/or abrasive surfaces or edges, i.e., rough concrete, corroded metals, metal roofing or
steel decking.
Avoid electric hazards. Use caution when performing arc welding. Arc flash from arc welding operations, including accidental arcs from
electrical equipment, can damage equipment and are potentially fatal. Be aware of chemical, environmental and atmospheric hazards that may
be encountered in sewage treatment and chemical plants, refineries, explosive hazards and toxic fumes, including flammable gases and dust,
and low oxygen content.
Other workplace hazards may include but not be limited to cable or debris tripping hazards, equipment failures, personnel mistakes, moving
equipment such as carts, barrows, fork lifts, cranes, or dollies. Do not allow materials, tools or equipment in transit to contact any part of the
entry/egress or fall protection system. Pay special attention to the lifeline. Do not work under suspended loads.
MSC06.1
052115
3
Tabla de contenido
