Adjusting Trimmer For User; Adjusting And Setting The Loop Handle; Removing And Fitting The Battery; Switching The Trimmer On/Off - Stihl FSA 86 R Manual De Instrucciones

English
1
2
3
► Place the thrust plate (2) on the shaft (3) so
that its smaller diameter faces up.
► Position the mowing head (1) on the shaft (3).
► Hold the fanwheel (4) with your hand.
► Manually rotate the mowing head (1) clock‐
wise and tighten it.
Removing the Mowing Head
► Switch off the brushcutter and remove the bat‐
tery.
► Hold the fanwheel with your hand.
► Unscrew the mowing head counterclockwise.
► Remove the thrust plate.
8

Adjusting Trimmer for User

8.1 Adjusting and Setting the Loop
Handle
The loop handle can be set to different positions
to suit the height and reach of the user.
► Switch off the brushcutter and remove the bat‐
tery.
a
3
► Undo the screws (2).
► Move the loop handle (1) to the required posi‐
tion and check that the following conditions
are met:
– The bump guard (3) fits between the loop
handle (1) and the control handle.
– a = no more than 30 cm.
► Tighten down the screws (2) so that the loop
handle (1) cannot be rotated on the shaft.
26
1
4
1
2
8 Adjusting Trimmer for User
9 Removing and Fitting the
Battery
9.1 Inserting the battery
1
2
► Insert the battery (1) up to the limit stop into
the battery compartment (2).
The battery (1) engages with a click and is
now locked.
9.2 Removing the Battery
► Set the brushcutter on a level surface.
► Keep one hand in front of the battery compart‐
ment so that the battery (2) cannot fall out.
1
► Press both locking levers (1).
The battery (2) is released and can be
removed.
10 Switching the Trimmer
On/Off
10.1

Switching the Brushcutter on

► Hold the brushcutter firmly with one hand on
the control handle – wrap your thumb around
the handle.
► Hold the brushcutter firmly with your other
hand on the loop handle or the handle hose
such that your thumb holds the loop handle or
the handle hose.
1
2
0458-833-9821-B