Time Mode - TFA 35.1116 Instrucciones Para El Manejo

TFA_No_35.1116_Anl_ 31.01.2012
CULT – Wireless Weather Station
• The clock will then work as a normal quartz clock. (see Manual setting
of clock and calendar
• The radio-controlled clock receives the signals at 0:00, 3:00, 6:00 and
12.00 o'clock in the morning.
Note for radio-controlled Time DCF:
The time base for the radio-controlled time is a caesium atomic clock
operated by the Physikalisch Technische Bundesanstalt Braunschweig. It
has a time deviation of less than one second in one million years. The
time is coded and transmitted from Mainflingen near Frankfurt via fre-
quency signal DCF-77 (77.5 kHz) and has a transmitting range of approxi-
mately 1,500 km. Your radio-controlled clock receives this signal and
converts it to show the precise time. Changeover from summer time or
winter time is automatic. The quality of the reception depends mainly on
the geographic location. Normally there should be no reception problems
within a 1,500 km radius around Frankfurt.
Please take note of the following:
• Recommended distance to any interfering sources like computer
monitors or TV sets is at least 1.5 - 2 metres.
• Inside ferro-concrete rooms (basements, superstructures), the
received signal is naturally weakened. In extreme cases, please place
the unit close to a window to improve the reception.
• During nighttime, the atmospheric interference is usually less severe
and reception is possible in most cases. A single daily reception is
adequate to keep the accuracy deviation below 1 second.
7. Operation
• Important: Buttons will not function while scanning DCF signal.
• The instrument will automatically quit the setting mode if no button
is pressed within 2 minutes.
• Press and hold ▲ or ▼ button in the setting mode for fast running

7.1 TIME mode

• Press the ▲ or ▼ button to enter the respective display area. When
changing the display area a brief beep tone will sound.
• TIME flashes on the display.
• You are now in the TIME mode.
24
21:04 Uhr Seite 13
CULT – Wireless Weather Station
7.2 Manual setting of clock and calendar
• Press and hold mode button in the setting mode for fast running.
• The day-of-week language digit is flashing. Press ▲ or ▼ button to
adjust it. Day-of-week language: German (DE), English (En), Swedish
(SW), Dutch (Du), Spanish (SP), Italian (IT) and French (Fr).
• Press mode button and the setting sequence is shown as follows:
Year, month, date, month/day sequence (American version) or
day/month (European version) , 12 (PM appears on the display after
12 h) and 24 hours system indication, hours and minutes. Press ▲ or
▼ button to make the desired settings.
• The manually set time will be overwritten by the DCF time when the
signal is received successfully.
7.3 Dual time
• Press mode mode twice in TIME mode.
• ZONE appears on the display.
• Press and hold mode button.
• 00:00+ flashes on the display. Press ▲ or ▼ button to adjust the dual
time in 30 min. time zone steps (+15/-13 hours).
• Press mode button four times to return to normal mode.
7.4 Indication of time
• Each press on the mode button in TIME mode will change the display
between:
→ Time with seconds
→ Time with day-of-week
→ Dual time with day of week
→ Dual time with seconds
→ Date
7.5 Alarm clock function
7.5.1 Manual setting of alarm clock
• Press alarm button in TIME mode.
→
W (Alarm time for Monday until Friday) and OFF or the last
adjusted alarm time appear on the display. You can now adjust
the alarm time.
• Press and hold alarm button.
25