Denver ASA-30 Manual Del Usario página 9

Entry / Exit Delay
A delay before activation can be set for the siren if the sensor is assigned
to the Delay Zone*.
If the Entry / Exit Delay is activated, the siren beeps once every second
until the system is armed, during the period of delay set. If one of your
system's sensors triggers the alarm, the ringing out of the siren will be
delayed accordingly.
* The name of the Delay Zone and the connection process may vary
depending on models. Refer to the user manual of your alarm system for
more information.
Set up the delay:
Enter Setup Mode by pressing the power button once. Press the power
button again
- once to set the delay to 10 seconds
- twice to set the delay to 20 seconds
- three times to set the delay to 30 seconds
- four times to deactivate the delay
Default setting: no delay.
9