Denver ASA-30 Manual Del Usario página 6

Use as an additional siren
If the siren is used as an additional siren, it must be registered to your alarm's
control panel. If the alarm is triggered, the ASA-30 will ring out and its LED
lights will fast flash.
Register the ASA-30 in the control panel
Press the Connect button on the siren. The LED lights up: the siren is
now in Connection Mode.
Press the "SOS" or "Arm" button on the control panel of your alarm
system. You hear one beep: the siren has been registered in the control
panel successfully (if you hear 3 beeps, the siren has already been
connected). Press the Connect button again on the siren to exit the
Connection Mode.
Note
Do not trigger any alarm with a sensor when registering the siren in
the control panel.
Test
Press the "Arm" button on the control panel. Both the built-in siren of
the control panel and the ASA-30 beep: the connection is successful. If
not, the connection has failed, try registering the siren again.
6