Denver ASA-30 Manual Del Usario página 7

Use as a standalone alarm system
Before using the ASA-30 as a standalone alarm system, it must be
connected to a remote control or an accessory (e.g. motion detector,
door / window contact).
When the system is armed, if a sensor is triggered, the siren will ring out
and the LED lights will fast flash.
Connect a remote control
Press the Connect button on the siren. The LED lights up: the siren is
now in Connection Mode.
Press any button on the remote control.
You hear one beep: the remote control has been connected to the siren
successfully (if you hear 3 beeps, the remote control has already been
connected).
Connect a wireless sensor
Press the Connect button on the siren. The LED lights up: the siren is
now in Connection Mode.
Trigger the sensor (e.g. walk in front of the sensor if you want to
connect a motion detector)
7