Tabla de contenido
Idiomas disponibles
Idiomas disponibles
English / USA
2
2
1
Blocking the Output Shaft
The output shaft has to be blocked as
follows to fit or remove the PolyCut 5-3.
:
Block the shaft by pushing the stop
pin (1) through the holes (2) in the
deflector and thrust plate – turn the
thrust plate back and forth if
necessary.
18
2
1
Mounting the Mowing Head
Keep the instruction sheet for the
mowing head in a safe place.
STIHL AutoCut 11-2
Assembling
:
Fit the spring (1) in the head (2).
:
Wind the nylon lines onto the spool:
see "Replacing the Nylon Line"
:
Assemble the mowing head: see
"Replacing the Nylon Line"
6
2
4
3
5
Mounting
:
Slip the mowing head (2) over the
shaft (3) and engage hex recess (4)
on external hexagon (5).
:
Fit the cap (6) on the mowing head
and screw it clockwise onto shaft as
far as stop. Tighten it down firmly.
FSB-KM
Capítulos
Tabla de contenido
