Headphone Socket - Sangean PR-D7 Instrucciones De Manejo

Setting tuning step
Tuning steps on some countries are different from where you
purchase the radio. If you buy the radio in Europe and intend to use
in Northern America or some Southern American countries.
You may have to adjust tuning step so the radio may continue to
serve you well.
While radio is switched off, long press Band/Step button for more
than 2 seconds will first show current FM tuning step.
Continue pressing Band/Step button for approx. another 5 seconds
until display FM and 50 kHz ( tuning step ) flashing followed by a
beep. By pressing Tuning Up/Down button, you may adjust to
100 kHz per tuning step.
After FM tuning step is reset, pressing Band/Step button again,
display will show MW and flash 9 kHz. By pressing Tuning Up/Down
button, you may adjust to 10 kHz per tuning step. Complete the
setting by pressing Band/Step button.
Setting 12 hour/ 24 hour format
After FM/MW tuning step is reset, display will flash 12H,
press Tuning Up/Down to select 24 Hour format, complete the
setting by pressing Band/Step button.

Headphone socket

A 3.5 mm headphone socket located on the left hand of your radio
is provided for use with either headphones or an earpiece.
Insert a plug automatically mutes the internal speaker.
GB
14