Sangean PR-D7 Instrucciones De Manejo página 13

Setting the HWS ( Humane Wake System )
buzzer alarm
A beep will activate when selecting the HWS alarm. The alarm
beep will increase in volume every 15 seconds for one minute
followed by one minute silence before repeating the cycle.
The HWS alarm will sound for an hour until turning off by pressing
the Power button. Press the Power button whilst the alarm is
activated will cancel the alarm for 24 hours.
1. The HWS buzzer alarm can be set either radio is on or off.
2. Press and release the HWS buzzer alarm button
the symbol
3. Long press the
by a beep, display Hour digit will flash.
4. Pressing Tuning Up/Down button to select required alarm hour,
then pressing
5. Pressing Tuning Up/Down button to select required alarm minute,
then press
Display will appear
6. Press and hold down Buzzer alarm button
2 seconds followed by a beep to switch on or off the alarm.
will show on the display.
button for more than 2 seconds followed
button again, the minute digit will then flash.
button again to complete alarm setting.
when buzzer alarm has been set.
,
for more than
GB
12