28. Install Bar/Handle and Apply Silicone
Install the towel bar or handle using the separate instructions provided.
Apply 100% silicone sealant along the wall jambs inside and outside the shower/bath, and along
the outside edge of the threshold.
Care and Cleaning
For best results, keep the following in mind when caring for your KOHLER product:
• Always test your cleaning solution on an inconspicuous area before applying to the entire surface.
• Wipe surfaces clean and rinse completely with water immediately after applying cleaner. Rinse and
dry any overspray that lands on nearby surfaces.
• Do not allow cleaners to soak on surfaces.
• Use a soft, dampened sponge or cloth. Never use an abrasive material such as a brush or scouring
pad to clean surfaces.
Kohler Co.
31
1314827-2-B