•
Never attempt to open any part or
dismantle the controls. Responsibility
for failure cannot be accepted if these
instructions have been ignored.
•
Do not use the appliance for anything
other than its intended use.
•
This appliance is intended for household
use only.
•
Regulations concerning the disposal
of the oil when scraping the appliance
have to be followed.
•
Any repairs that need to be done to
GB
the heater must be referred to an
authorized serviceagent only.
•
The appliance is not intended for use
by young children or in� rm persons
without supervision.
•
Young children should be supervised to
ensure that they do not play with the
appliance.
•
If the supply cord is damaged, it must
be replaced by the manufacturer or its
service agent in order to avoid a hazard.
•
The appliance is not intended for use
by persons (including children) with
reduced physical, sensory or mental
capabilities, or lack of experience
and knowledge, unless they have
been given supervision or instruction
concerning use of the appliance by a
person responsible for their safety
•
Children should be supervised to
ensure that they do not play with the
appliance.
24
Attaching the wheels
•
Place the radiator upside down on a soft
surface to avoid scratches.
•
Secure the cross-members with the
wheels (5) between the outer � ns (4) on
each side using the U-bolts and wing
nuts supplied. Tighten the wing nuts
securely.
•
Turn the radiator the right way up so
that it stands on all four wheels.
Use
•
Plug the radiator in.
•
Make sure that the oil radiator is a safe
distance from the wall, furniture and
other � ammable objects.
•
Set the thermostat (2) to the maximum
temperature.
•
Use the function switches (1) to control
the strength and speed of the heat
output (and thus what power the oil
radiator is running on).
Press one or both switches as required:
Switch I
Switch II
Both switches
Low power
Medium power
High power