System Requirements - Sony IPELA NSR Serie Manual De Instalación

High reliability
The NSR-100/50 performs high reliability through:
• NSR-100: RAID 0, 1+0, and 5
• NSR-50: spanning* and RAID 1
When used with a RAID 1, 1+0 or 5, the system can
continue functioning even if one of the hard disks develops
a malfunction. Similarly, because the system software and
settings are stored on the internal flash memory of the
NSR, if the system software develops a malfunction,
lightning-quick restoration of the system is possible. The
NSR also supports uninterruptible power supplies
(UPS)**, making them extremely reliable systems.
* Spanning: Function allowing several hard disks to be
virtually seen as one.
** Sony recommendation only.
Notes
• When you use RAID 0 with the NSR-100 or spanning
with the NSR-50, there is no data redundancy. Also,
storage capacity varies according with the RAID level.
• RAID is not available for the NSR-25.
Other features
• You can display the images from up to 64 cameras
(8 × 8 images) on one screen.
• The NSR is capable of manual, scheduled, and alarm
recording, among others.
• The NSR is equipped with a motion detection
1)
function (Video Motion Detection (Recorder)).
• Run searches for recorded images by camera name,
date, alarm, and other methods.
• Create privacy zones by using the dynamic masking
2)
functions . Dynamic masking covers pan, tilt, and
zoom.
• Precise alarm processing is made possible by
performing the various types of filtering
image processing results sent from the camera in the
form of object information metadata. Because filtering
can be applied to metadata that has already been
recorded, you can also search for areas of interest after
recording is finished.
• Audio recording and playback
from compatible cameras.
1) Some functions are limited depending on the number of
cameras connected.
2) Some functions are limited depending on which camera
models are connected.
3) To perform motion detection and object detection using
metadata, a camera that supports motion detection by
metadata is required. The use of metadata is supported for
up to 32 cameras.
4) The optional active speakers are required.
Important
This manual only describes how to install and configure
the NSR. For detailed explanations about how to use the
recorder, refer to the "User's Guide" (PDF) on the
supplied "NSR Series Manual, Tool & Source Codes CD".
3)
that use the
4)
are also supported

System Requirements

The hardware required in order to use this recorder are
as follows.
• Sony Network cameras
Contact your dealer for details about compatible Sony
network cameras.
1)
• Monitor
2)
• USB Keyboard
3)
• USB Mouse
• Network switch
• 1000Base-T/100Base-TX/10Base-T cable
• CF (CompactFlash) card or USB memory device
1) For details about monitors supported by the NSR, contact
your retailer.
The following "Generic" type monitors can be selected.
Frequency is indicated at the end of each line.
- Generic LCD Display; LCD Panel 1024×768; 40-70
- Generic LCD Display; LCD Panel 1280×1024; 50-75
- Generic LCD Display; LCD Panel 1600×1200; 60
- Generic CRT Display; Monitor 1024×768; 50-70
- Generic CRT Display; Monitor 1280×1024; 50-90
- Generic CRT Display; Monitor 1600×1200; 50-90
The following resolutions can be specified.
- XGA (1024×768)
- SXGA (1280×1024)
- UXGA (1600×1200)
2) Use a USB keyboard with a cable. However, keys other
than the standard may not function. Wireless or infrared
USB keyboards may also not function properly.
3) Use a USB mouse with a cable. However, three-button or
wheel mice may not function properly. Wireless or infrared
USB mice may also not function properly.
4) Required when backing up system information such as
logs.
- For CF, use a card that has been formatted in advance
with VFAT.
- For USB memory, use a device that supports general
USB Mass Storage Class specifications.
- CF cards are not compatible with the NSR-25.
4)
5
System Requirements