Installing The Hardware - D-Link DAP-3520 Guía De Instalación Rápida

Installing the Hardware

Power over Ethernet (PoE) Setup
Step 1
Connect one end of an Ethernet cable (included with your package) to the
LAN port on the DAP-3520 and the other end of the Ethernet cable to the
port labeled P+DATA OUT on the PoE base unit.
Connect another Ethernet cable from the DATA IN port on the PoE base unit
Step 2
to your router/switch or to a PC.
Attach the power adapter to the connector labeled POWER IN on the PoE
Step 3
base unit. Attach the power cord to the power adapter and into an electrical
outlet.
8