First Aid - DeWalt DXAEWPC4 Manual De Instrucciones

Cargador / mantenedor de batería impermeable de 4 amp
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

• Remove personal metal items such as rings, bracelets, necklaces and
watches when working with a lead acid battery. A lead acid battery
can produce a short circuit current high enough to weld a ring, or
similar metal object, to skin causing a severe burn.
• Be extra cautious to avoid dropping a metal tool onto the battery. It
might spark or short-circuit the battery or another electrical part, and
that may cause an explosion.
• Never allow battery acid to come in contact with this apparatus.
• Do not operate this apparatus in a closed area or restrict ventilation
in any way.
• Always turn the battery charger off by unplugging it when not in use.
• DO NOT OPEN THE BATTERY CHARGER — there are no user-
serviceable parts inside. Opening the battery charger will void
manufacturer's warranty.
• Operate battery charger only as described in this Instruction Manual.
• Check battery charger and components periodically for wear and
tear. Return to manufacturer for replacement of worn or defective
parts immediately.
WARNING: To reduce the risk of injury, follow these instructions
and those published by the battery manufacturer and manufacturer of
any equipment you intend to use with this unit. Review cautionary
markings on this product and on the engine.
DC Accessory Plug Safety
• WARNING: NEVER connect this unit to a positive grounded vehicle
by the dc accessory plug.
• Make sure that the vehicle's accessory socket is clean and free of
debris before connecting the unit.
WARNING – RISK OF FIRE! If the vehicle accessory outlet fuse
opens (blows) when plugging in this battery charger, do not use this
battery charger with this vehicle accessory outlet:
• Do not repeatedly replace the fuse.
DXAEWPC4_ManualENSP_062117.indd 6-7
• Do not replace the vehicle accessory outlet fuse with one of a higher
amperage rating.
• Never attempt to patch the fuse with tin foil or wire.
Any of these actions may cause serious electrical damage
and/or a fire.
Specific Safety Instructions for Using the
Unit in Wet Environments
The housing of this unit is rated to IP67 dust-proof and
waterproof standards. However, it is recommended that you
observe the following:
• Never submerge the unit in water deeper than 1 meter, for time longer
than 30 minutes and/or in temperatures other than between 41ºF and
104ºF (5ºC and 40ºC), or the unit could sustain permanent damage.
• Never submerge the unit in water unless the bushing (insulation) of
the AC or DC cord is intact.
• Do not allow plug or clamps to be exposed to the elements for long
periods of time; and never submerge them.

First aid

• Skin: if battery acid comes in contact with skin, rinse immediately
with water, then wash thoroughly with soap and water. If redness,
pain, or irritation occurs, seek immediate medical attention.
• Eyes: If battery acid comes in contact with eyes, flush eyes
immediately, for a minimum of 15 minutes and seek immediate
medical attention.
SAVE THESE
INSTRUCTIONS
FOR FUTURE USE
6
Main Unit Components (Fig. 1)
A. Detachable 360º Rotating
D. Reverse Polarity/Fault LED
Hook
E. Charging LED
B. Mounting Holes
F. Charging Complete LED
C. Power LED
A
B
B
C
D
E
F
Back of Unit (Fig. 2)
G. Hook Release Button
H. Hook Slot
G
H
7
6/21/2017 10:14:02 AM
Tabla de contenido
loading

Tabla de contenido