Cleaning And Storage - Honeywell HS-0016 Manual Del Usuario

OPERATION
• Place your fan on a dry,
level surface.
• Be sure your fan is OFF
before plugging it in.
• Plug the power cord into a
polarized 120 volt AC wall
outlet.
Fig. 7

CLEANING AND STORAGE

• Be sure your fan is OFF.
• Unplug the fan before
cleaning.
• Remove the Front Grille.
• Unscrew the Blade Knob
by turning it CLOCKWISE.
• Pull the Fan Blade away
from the Motor Housing.
CONSUMER RELATIONS
NOTE: IF YOU EXPERIENCE A PROBLEM,
PLEASE RETURN THE FAN TO THE ORIGINAL
PLACE OF PURCHASE OR SEE YOUR
WARRANTY. DO NOT ATTEMPT TO OPEN THE
MOTOR HOUSING YOURSELF. DOING SO MAY
VOID YOUR WARRANTY AND CAUSE DAMAGE
TO THE FAN OR PERSONAL INJURY.
IF YOU HAVE ANY QUESTIONS REGARDING
THIS FAN, PLEASE CALL OR WRITE:
HONEYWELL CONSUMER PRODUCTS
CONSUMER RELATIONS DEPARTMENT
TOLL FREE: 1-800-332-1110
• To change the tilt angle of
the fan, simply tilt the
Motor Assembly to the
angle desired (Fig. 7).
• To operate the Child
Resistant switch, push in
and turn the Speed Control
Knob (Fig. 8).
Fig. 8
PUSH
IN AND
TURN
• Clean the Fan Blade and
grilles with a soft, damp
cloth.
• DO NOT immerse the fan in
water and never allow
water to enter the Motor
Housing.
• DO NOT use gasoline,
paint thinner or other
chemicals to clean the fan.
Mail questions or comments to:
HONEYWELL CONSUMER PRODUCTS
Consumer Relations Dept.
250 Turnpike Road
Southborough, MA 01772 U.S.A
Please be sure to specify model
number.
Thank you for purchasing a Honeywell fan.
Please visit us at
www.honeywell.com/yourhome
• To activate or disengage
the oscillating feature,
push down or pull up on
the Oscillation Control
Knob (Fig. 9).
Fig. 9 OSCILLATION
CONTROL KNOB
• To store, disassemble and
carefully clean the fan as
instructed and store it in
its original box. You may
leave the fan assembled
and covered to protect it
from dust. Store the fan in
a cool, dry place.