Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Note on use
Cleaning
To keep the stand clean, occasionally wipe the stand
with a dry soft cloth. Stubborn stains may be removed
with a cloth slightly dampened with diluted detergent.
Then wipe the area with a dry soft cloth. Do not use
chemicals, such as thinner or benzine, as they damage
the finish of the stand.
For Sony dealers
Be sure to thoroughly read the
safety precautions described on the
previous pages and pay special
attention to safety during the
installation, maintenance, checking,
and repair of this product.
Be sure that two or more persons do
the installation work.
Be sure that two or more persons install the Display
Unit on the Floor Stand. If necessary, include another
person to support the rear of the Display Unit. Do not
attempt to install the stand by yourself. If you do so, it
may lead to an accident or injury. Be sure to keep
children away during the installation.
Be careful not to injure your hands or
fingers during installation.
Be careful not to injure your hands or fingers when
attaching the Display Unit to the Floor Stand.
Be sure to install the Display Unit
securely by following the
instructions.
Tighten the screws securely. If the Display Unit is not
installed securely, it may fall and cause injury.
4
(US)
Check the parts
Name
Floor Stand
Display securing screw
M5×L16
Anchor attachment
Cable cover
Cable cover securing screw
M4×L12
Be sure to have appropriate sized Phillips screwdrivers
on hand for the various sized screws used for
assembly.
Quantity
1
4
2
1
2
Tabla de contenido
