TDK relyon plasma piezobrush PZ3 Manual De Instruccion página 7

Attention – Damage to device!
Under no circumstances may the fan cover on the rear side of the device be closed. This
would interrupt the supply of cooling medium required in operation.
Never touch the piezo element at the front of the device with sharp-edged objects. This
component may be damaged by improper handling.
Protect the device from falls or other hard impacts which may damage the electronics or
piezo element.
Attention! Device for use in industrial environment
Due to the presence of both conducted and radiated interference, this device may have
difficulty in ensuring electromagnetic compatibility in other environments.
Caution – hot surface!
The exchange modules can become hot during operation. Do not touch them until they
have cooled down and take care not to damage thermally sensitive surfaces when working
with the exchange modules.
The workpiece to be treated can also heat up during the plasma process, depending on the
process parameters. If necessary, allow the workpiece to cool down before touching it.
BA-PZ3_ML / F0354401 7