Securing The Gear Motor - Vimar ELVOX EKKO 204D Manual Para El Conexionado Y El Uso

EKKO
Assembling the pillar bracket:
Securing the gearmotor to the pillar bracket:
Fit the gearmotor to the bracket:
- Unscrew the screw F, then remove the casing C
- Insert the washer R putting it on the bracket
- Insert the gearmotor
- Lock the gearmotor with the screw V and nut (do not overtighten the nut, check the rotation of the gearmotor that must have no friction)
V
R
This is the correct position of the pin for fastening the gate leaf drive bracket, proceed as follows:
- Assemble the bracket as shown
EN
F
C
13