Vimar ELVOX EKKO 204D Manual Para El Conexionado Y El Uso página 16

EKKO
- Fit the gate leaf drive bracket to the pin of the gearmotor, locking it with the screw V, placing washer R1 and R2 in between as shown in Figure 15. The
smooth washer R1, has to be placed above the knurled washer R2. It is recommended to lubricate the pin before inserting it into the drive bracket.
Move the gate leaf into the fully closed position, check with a spirit level that the gearmotor is in a perfectly horizontal position, then mark the two points for
drilling the gate leaf
The fastening system must be chosen according to the material of which the gate leaf is made.
Unlocking for manual gate movement:
Unlock the gearmotor by rotating the circular cover 180°, then insert the release key and turn it 90°.
14
R1
R2
V
45 mm
EN