How To Assemble; Operating - Royal Prestige maXtractor ULD-322NB Manual De Usuario

HOW TO ASSEMBLE

STEP 1
Top-set Assembly
Check Before
• Wash the parts before fi rst use.

Operating

• Ensure that the compression silicone and silicone ring are assembled properly.
1 Firmly insert the compression silicone
into the slot below the pulp spout.
Note |
The MaXtractor™ may leak if not assembled
properly.
Assemble the strainer into the rotation
2
wiper, then place this assembly into the
juicing bowl ensuring the red dot ●
the strainer is aligned with the red dot
on the juicing bowl.
8
3 Place the UltraSqueezer™ into the strainer.
Turn and press down on it until it clicks
into place.
Note |
The UltraSqueezer™ needs to be locked in
place in order to close the hopper.
Place the hopper onto the juicing bowl
4
●
aligning the red dot on the hopper
●
with the red dot on the juicing bowl.
on
Turn clockwise to close, aligning the red
●
dot ● on the hopper with the close mark
.
STEP 2
Top-set and Base Assembly
For easy assembly hold the hopper
TIP
and turn clockwise as shown in the
illustration.
5 Place the top-set on top of the base.
Align the arrow ▼ on the hopper with
the arrow (open) on the base then
slightly turn the top-set clockwise,
until the hopper arrow is aligned with
the arrow (close) .
6
Open/Close mark on the top-set.
Open
Close
Note |
MaXtractor™ will not operate if parts are
not assembled properly.
7
Place the pulp container under the
pulp spout and place the juice
container under the juice spout as
shown in the illustration.
Detachable
9