Troubleshooting Problems
Problem
The unit has stopped and LCD
backlight is flashing.
The unit doesn't turn on.
I cannot hear the built-in sounds.
I can't hear music from attached
MP3 device.
I can't remove the front end
cap from the mamaRoo
®
during disassembly.
The packaging foam blocks do not
fit when the base is repackaged.
30
Solution
An obstruction has occurred,
blocking movement of the
mamaRoo
. Clear the obstruction
®
and press play to resume.
Check that the unit is connected to
a power source.
Refer to page 15 to verify that sound
is not muted. The mamaRoo is
designed to turn off after 4 hours of
uninterrupted use. If you would like to
continue using your mamaRoo, press
the power button.
Adjust the volume on both the
mamaRoo
and the MP3 device.
®
Refer to image #5 in the
Disassembly section of this manual.
The base must be homed. Refer to
image #9 in the Disassembly section
of this manual.
Care
For your child's continued safety, periodically inspect the product to
make sure that all connections (screws, snap buttons, zippers) are securely
fastened, that they do not show signs of wear or abuse, and that they are
not damaged or broken.
Cleaning your mamaRoo
®
• The fabric seat and fabric toys are machine washable. Wash them in cold
water on the gentle cycle. Do not use bleach. Tumble dry separately on
low heat and remove promptly.
• After washing, zip the seat fabric back onto the seat ring so that the hole
for the toy bar is at the top of the seat. Snap the seat fabric into place at
both ends. Do not install the seat fabric upside down.
• The base, metal and plastic seat parts, and toy bar can be wiped clean
using a mild cleaning solution and a soft, damp cloth. Do not immerse the
base, seat parts, or toy bar.
• Disconnect the mamaRoo
from the power supply before cleaning the
®
base.
Please visit global.4moms.com.
ENGLISH
31