Troubleshooting; Need Help - Lorex Baby CARE 'N' SHARE Guía Para Usuarios

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Troubleshooting

Problem
No video displayed on
the monitor
Monitor screen keeps
turning off
The camera is not
detected; "Out of Range"
is shown on the monitor
Feedback / squealing
noise coming from the
monitor
Touch buttons on the
monitor aren't working
Display is frozen

Need Help?

Product Support is available 24/7 including product
information, user guides, quick start guides, and FAQ's
at www.lorexbaby.com/support
Solution
• Press and hold the
button for 3 seconds to power
on the monitor.
• Monitor is out of batteries. Plug
in the monitor power adapter.
• Video Off mode is on. Press
any button to turn the screen
back on.
• Power save mode is on. Press
any button to turn the screen
back on.
• If none of the solutions above
work, press the Reset button on
the back of the monitor.
• The monitor battery is low. Plug
in the monitor power adapter.
• Power save mode is on. Press
any button to turn the screen
back on.
• Make sure the camera is
powered on.
• The camera and monitor may
be out of range. Extend the
antennas on the monitor and
camera or move the monitor
and camera closer together.
• You may need to pair the
camera and the monitor
again. See "Pairing Additional
Cameras" on page 34 for
details.
• Wrong channel selected.
Press
repeatedly to select
a channel with a camera
connected to it.
• Your camera and monitor may
be too close to each other.
Move them further apart.
• Lower the monitor volume.
• Press the Lock button (
the side of the monitor to unlock
the touch buttons.
• Press the Reset button on the
back of the monitor to reboot.
Settings and saved files are
unaffected.
38
) on
Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Bb2411

Tabla de contenido