Optional - Mounting The Camera - Lorex Baby CARE 'N' SHARE Guía Para Usuarios

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Optional - Mounting the Camera

Before permanently mounting the camera:
• Determine where you will get the best view of
your baby.
• Ensure the power cable is long enough to power
the camera.
• Test your camera(s) before mounting permanently.
Make sure all power cables are at
least 3ft / 1m away from the crib
and out of reach of your child.
Use the included cable clips to help
keep power cords away from your
child. See "Using the Cable Clips" on
page 10 for installation details.
To mount your camera:
Fixed Camera
Drill 2 holes in the wall with centers exactly
1
38mm apart.
Tap anchors into holes with a hammer. Insert
2
screws 2/3 of the way.
While holding the camera base firmly in
3
place, twist the camera counterclockwise to
remove it from the base.
Reattach the base to the mounting thread on
4
the back of the camera.
Align the mounting points with the screws
5
and push the camera down.
Reattach the
camera base
here
8
P/
Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Bb2411

Tabla de contenido