Upload - BZ-TECH Bematech DC-2000 Manual Del Usuario

User´s Manual DC - 2000 - Ver1.0
Sincronizador inicial/final (Pre/Postamble)
1.Select "System Menu>3.Setup>3.Barcode Setup>3.Pre/Postamble" to enter
the setup.
2.Select to "Enable" or "Disable" for Get Barcode Type. When enabled, the
barcode type ID code will be added in front of every data stored. Press Enter to
confirm.
3.Select "Disable", "Beep1", "Beep2", "Beep3" for Scan TimeOut Beep. Press Enter
to confirm.
4.Enter the Preamble characters you want to add to the recorded data in
the Pre field. It will be added to the front of the recorded data and after the
barcode ID code if it is added. Press Enter to confirm.
5.Enter the Posamble characters you want to add to the recorded data in the
Pos field. Press Enter to confirm. It will be added to the back of the recorded
data.
For example: the EAN 13 Barcode type ID code is "->10", the Preamble "123", and
the Postamble "999". Suppose a barcode representing "0028200106605" is
scanned and decoded, and the data gets stored and uploaded, what is going to
be displayed on the host screen will be "->101230028200106605999".

3.2.6 Upload

Select "4. Upload" from the "System Menu" to open the Upload menu. The
following screen appears:
Upload Data
1.Select "System Menu>4.Upload>1.Upload Data" to enter the upload data
screen.
2.The name of the file is displayed on the screen. Press M2 to select Y or N for
data upload. Press Enter to confirm.
48