BZ-TECH Bematech DC-2000 Manual Del Usuario página 44

User´s Manual DC - 2000 - Ver1.0
2.Press the left or right arrow buttons to turn back light on or off. Press Enter to
confirm.
3.Use the left or right arrow buttons to adjust the value for LCD contrast and
press Enter to confirm.
Beep Volume
1.Select "System Menu>3.Setup>>1.Basic Setup>2.Beep Volume" to enter the
setup.
2.Press the left or right arrow buttons to change the volume to Loud, Medium,
Low, or Quiet. Press Enter to confirm.
Auto Power Off
1.Select "System Menu>3.Setup>>1.Basic Setup>3.Auto Power Off" to enter the
setup.
2.Press the left or right arrow buttons to change the time. Press Enter to
confirm.
System Setup
Select "System Menu>3.Setup>2.System Setup" to open System Setup menu.
The following options appear:
Communication
Select "System Menu>3.Setup>2.System Setup>1.Communication" to enter the
setup. The following options appear:
Comm. Paramter
Select "System Menu>3.Setup>2.System Setup>1.Communication>1Comm.
Paramter" to set the Baud Rate, Parity Check, Data Bits, and Stop Bit of the
data collector. Use the left or right arrow buttons to change the value and Press
M1 to exit when you are done.
Baudrate options: 4800,9600,19200,38400,57600,115200.
Parity Check: Even, Mark, None, Odd, Space.
Data Bits options: 8,7.
Stop Bits: None, One, OnePointFive, Two.
On Line Upload
1.Select "System Menu>3.Setup>2.System Setup>1.Communication>2.On Line
43