BZ-TECH Bematech DC-2000 Manual Del Usuario página 45

User´s Manual DC - 2000 - Ver1.0
Upload" to turn this function on or off. Use the left or right arrow buttons to
change the value and press Enter to confirm.
This function allows the input data to be sent out via the RS-232 port
immediately and when the Free Task is executed, it allows the data to be sent
out via the communication port at the moment the data occurs and is stored up
in each field.
2.When this function is set to "ON", use the left and right arrow buttons to
select a parity characters as the Delimiter: None, ,, ;, Space, CRLF, CR, and LF.
The selected character will be transmitted out after each data is uploaded.
3.Scan Data screen appears. Press the SCAN button to scan a barcode. The
scanned data will be uploaded via the communication port to the host.
Timeout Value
Select "System Menu>3.Setup>2.System Setup>1.Communication>3Timeout
Value" to set the timeout value. Use the left or right arrow buttons to change
the value.
System Timer
1.Select "System Menu>3.Setup>2.System Setup>2.System Timer" to enter the
setup.
2.Follow the format shown to enter the date and press M1.
3.Follow the format shown to enter the time and press Enter to confirm.
ID/PW/DataMode
Select "System Menu>3.Setup>2.System Setup>3.ID/PW/DateMode" to enter
the setup. The following options appear:
Device ID
1.Select "System Menu>3.Setup>2.System Setup>3.ID/PW/DateMode>1.Device
ID" to enter the setup.
2.Device ID is displayed. Press Enter to input new or edit existing ID. A password
maybe required to change the ID.
Password
1.Select "System Menu>3.Setup>2.System Setup>3.ID/PW/DateMode>2.
Password" to enter the setup to set your password.
2.Enter the password if a password had already been set and press Enter.
44